What is a dock leveler overhaul

Dock Leveler Overhaul: What It Is, When to Do It and How Much You Save vs Replacement

A dock leveler overhaul is major maintenance in which all critical components are dismantled, inspected, repaired and worn parts replaced, restoring the leveler to near-new condition. It goes further than a general repair and typically costs far less than full replacement, which can be 2-3 times more.

Summary: if your dock leveler is 5-10 years old and structurally sound but its systems are wearing, an overhaul is the most cost-effective option.

Repair vs overhaul vs new installation

TopicGeneral repairOverhaulNew installation
ScopeFix specific issuesFull dismantle, inspection and replacementCompletely new
Estimated cost (THB)20,000-80,00080,000-200,000200,000-500,000+
Life added1-2 years8-12 years15-20 years
Suitable forMinor issues5-10 years old, general wearSevere damage or outdated
DocumentationLimitedCompleteComplete plus warranty

Costs are indicative ranges and depend on brand, size and condition.

What is a dock leveler overhaul

Eight signs it is time

  1. Hydraulic oil leaks around the pit: worn seals, hoses or joints
  2. Slow lifting: from about 10 seconds to 30-60 seconds
  3. Lip will not extend or retract properly
  4. Platform vibration when forklifts cross
  5. Abnormal grinding or squeaking
  6. Does not return below grade: stuck cylinder or faulty valve
  7. Control panel malfunction
  8. 5-8 years without an overhaul

Seven process steps

  1. Pre-assessment and condition report
  2. Systematic disassembly
  3. Inspection and cleaning
  4. Component replacement
  5. Reassembly and calibration of pressure, limit switches and speed
  6. Load testing at 100% and 125% of capacity, plus safety checks
  7. Documentation: overhaul report, parts list, test results and warranty

Cost example (indicative)

Four hydraulic dock levelers, seven years old:

OptionTotal costLifeCost per year
A: Overhaul (120,000 THB/unit)480,000 THB8-10 years48,000-60,000 THB
B: New (350,000 THB/unit)1,400,000 THB15-20 years70,000-93,000 THB

With a sound pit and platform, option A saves about 920,000 THB upfront and costs less per year.

Parts usually replaced

GroupParts
StandardSeal kits for all cylinders, hydraulic oil and filters, lip and platform hinge pins and bushings, rubber bumpers
Condition-basedHoses (cracked or over 5 years old), solenoid valves, lip cylinder, main cylinder, control panel and push buttons

Frequently Asked Questions

How long does an overhaul take?

Typically 1-3 working days per dock.

What is the warranty?

ALLA warrants overhaul work and replaced parts for 6-12 months, depending on scope.

Can all brands be overhauled?

Yes, regardless of the original installer.

Do operations need to stop?

No. Docks can be overhauled one at a time.

Request an on-site assessment via Contact Us.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *